left-hand nut and weld-on bushing. If you are planning to build a 3 or 4 link and you like comfort, the Johnny joint is your best choice.
RockJock's forged Johnny Joints for suspension system manufacturers and builders offer 30 degrees of unrestricted movement in any direction, compared to 22 degrees with a regular hip joint! Johnny Joint rod ends offer cushioning that a hip joint cannot offer via high-density urethane bushings that encase the inner ball. The heat-treated centre balls are drilled for lubrication through the bolt and the internal parts of the joint are held in place with 2 robust, heat-treated side rings and a lock washer. This particular joint is 2 1/2 inches in diameter, fitted with a grease nipple for lubrication, 2 1/4 inches of 1-inch-14 left-hand thread on the shank, and a 2.625-inch ball with a mounting width and a .562-inch through bolt hole. Finished with gold galvanised finish
| Weight | 3 kg |
|---|---|
| Dimensions | 15 × 8 × 8 cm |
| size | 14 mm, 16 mm, 18 mm, 19 mm |
Reviews
There are no reviews yet.